HPAVC

home *** CD-ROM | disk | FTP | other *** search

/ HPAVC / HPAVC CD-ROM.iso / pc / PICKLOCK.ZIP / PICKLOCK.TXT < prev

Wrap

Text File | 1993-06-08 | 14.7 KB | 414 lines

{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=} {=--=} {=--=} {=--=} Picking Combination Locks {=--=} {=--=} {=--=} {=--=} Written by: The Byte Byter {=--=} {=--=} {=--=} {=--=} {=--=} {=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=}{=--=} Ok, so ya say ya wanna learn how to pick combination locks...This text file should help you. As a matter of fact, if ya do it right, it will help you. First of all, let me tell you about the set-up of a lock. When the lock is locked, there is a curved piece of metal wedged inside the little notch on the horseshoe shaped bar that is pushed in to the lock when you lock it. To free this wedge, you must(must is a word used to much) you usually(that sounds much better) have to turn the lock to the desired combination and the pressure on the wedge is released therefore letting the lock open. I will now tell you how to make a pick so you can open a lock without having to waste all that time turning the combination (this also helps when ya don't know the combination to begin with). First of all, ya need to find a hairpin. What's a hairpin? Well, just ask your mom. She will have one. If she asks what its for, say ya gotta hold something together... If she says use a rubberband or use a paperclip, tell her to fuck off and die and then go to the store and rip off a box of 50 or so. Ok, enough stalling (yea, i was stalling). Once you have your hair pin (make sure its metal), take the ridged side and break it off right before it starts to make a U-turn onto the straight side. The curved part t can now be used as a handle. Now, using a file, file down the other end until it is fairly thin. You should do this to many hairpins and file them so they are of different thicknesses so you can pick various locks. Some locks are so cheap that ya don't even have ta file! But most are not. Ok, now you have a lock pick. Now if ya haven't figured it out, here's how ya use it. You look at a lock to see which side the lock opens from. If you can't tell, you will just have to try both sides. When ya find out what side it opens from, , take the lock pick and stick the filed end into the inside of the horseshoe- shaped bar on whichever side the lock opens from. Now, put pressure on the handle of the lock pick (pushing down, into the crack) and pull the lock up and down. The lock will then open because the pick separated the wedge and the notch allowing us thieves to open it. Don't say bullshit until you've tried it. because i have gotten lots of beer money from doin' this to fellow students' gym lockers. Also, this technique works best on American locks. I have never picked a Master lock before because of the shape a pressure of the wedge but if anyone does it, let me know how long it took. Also, the Master lock casing is very tight so ya can't get the pick in. So, if you're locking something valuable up, use a Master, cuz at least ya know I won't be picking it and I'm sure there aren't that many that could. And when i say pick, i don't mean lighting a stick of dynamite next to the lock, picking is opening a lock without t using force, making a substitute key, etc... If any of you believe that this information is not sufficient for picking an American lock, or any other kind besides Master, leave me a message at /\/\etalland 1 (503) 538-0761. This concludes my text file on picking combination locks. My next text file will probably be "Picking key locks". See ya later. The Byte Byter ^^^ ^^^^ ^^^^^ ||| |||| ||||| ^^^ ^^^^ ^^^^^ ^^^ ^^^^ ^^^^^ ^^^ ^^^^ ^^^^^ ''' '''' ''''' This text file was written on 06/21/85. (> ENTER NUMBER: [+][+][+][+][+][+][+][+][+][+][+][+][+] [+] [+] [+] L O C K P I C K I N G [+] [+] [+] [+][+][+][+][+][+][+][+][+][+][+][+][+] [+] [+] [+] WRITTEN BY: DARC DEATHE [+] [+] [+] [+][+][+][+][+][+][+][+][+][+][+][+][+] THIS TUTORIAL WILL DEMONSTRATE HOW TO "PICK" A PIN TUMBLER LOCK. USE OF THIS MATERIAL IS FOR LOCKSMITHS ONLY, ANY USE OF THIS INFORMATION FOR ILLEGAL PURPOSES IS FORBIDDEN AND AGAINST THE LAW. (AS LONG AS WE ARE AT IT, DO YOU WANT TO BUY SOME LAND IN FLORIDA?) IN ORDER TO PICK A PIN TUMBLER LOCK, YOU WILL REQUIRE FOUR ITEMS: A LOCK, YOU, A PICK, AND A TENSION WRENCH. YOU CAN USSUALLY GET THESE AT A LOCKSMITH STORE, IF YOU CAN NOT FIND ONE NEAR YOU THERE WILL BE AN ADDRESS AT THE END OF THE ARTICLE THAT YOU CAN ORDER THEM FROM. HERE IS AN ILLUSTRATION OF A PICK AND A TENSION WRENCH: ________/ !________ PICK TENSION WRENCH MOST PEOPLE KNOW OF THE NEED FOR THE PICK, BUT HAVE NO IDEA WHAT THE WRENCH IS FOR. IT IS VERY IMPORTANT AND WITH- OUT IT IT WOULD BE IMPOSSIBLE TO PICK A LOCK. IN ORDER TO PICK A LOCK, WE MUST COUNT UPON THE IMPERFECTION OF THE LOCK. BEFORE WE LOOK AT HOW TO ACTUALLY PICK THE LOCK, WE WILL LOOK AT THE PARTS OF IT AND HOW THE IMPERFECTION PART FITS IN. HERE IS A DISSASSEMBLED LOCK: / / / / \ \ \ \ SPRINGS -> / / / / \ \ \ \ _ _ _ _ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! DRIVERS ->! ! ! ! ! ! ! ! !_! !_! !_! !_! _ _ ! ! _ ! ! BOTTOM PINS ->! ! ! ! _ ! ! ! ! ! ! ! ! ! ! \_/ \_/ \_/ \_/ _____________________ ! : : : : : : : : ! HOUSING ->! : : : : : : : : ! ! : : : : : : : : ! !___: :_: :_: :_: :___! ! : : : : : : : : ! PLUG ->! : : : : : : : : ! !______________________! ! ! ! ! ! ! !_____________________! ___ / \ ! !__ _ _ ! \__ / \_/ \__ ! \/ \ \__/------------------- <- KEY WHEN YOU INSERT A KEY INTO A LOCK, THE BOTTEM PINS ARE PUSHED UP, AND IF IT IS THE PROPER KEY, THE TOPS OF THE BOTTOM PINS WILL MATCH WITH THE SPOT WHERE THE PLUG AND HOUSING MEET, THUS ALLOWING YOU TO TURN THE PLUG, AND OPEN THE DOOR, ETC.. WHEN YOU INSER THE KEY, THE BOTTOM PINS GO INTO THE VALLEYS OF THE KEY, THUS MEANING THAT THE KEY MUST HAVE THE RIGHT HEIGHT VALLEYS TO MAKE THE LOCK OPEN. PRETTY ELEMENTRY, RIGHT? WELL NOW WE CAN MOVE ON TO HOW TO PICK A LOCK. IN ORDER TO PICK A LOCK WE (AS I SAID BEFORE) DEPEND ON THE INACCURACY OF THE MANUFACTURING PROCESS. THE FIRST THING TO DO IS TO INSERT THE TENSION WRENCH INTO THE LOCK AND APPLY A SLIGHT PRESSURE TO THE LEFT (OR RIGHT IF YOU WISH) SO THAT IF YOU COULD LOOK INSIDE THE LOCK AT WHERE THE PLUG AND THE HOUSING WOULD MEET, IT WOULD LOOK LIKE THIS: ! !*! ! HOUSING ! !*! ! ! !*! ! __________! !*! !___________ __________ !*! ____________ ! !*!! PLUG ! !_!! ! _ ! ! !*!! ! \_/! NOW A SLIGHT PRESURE IS ON THE PINS. BECAUSE THE PINS CAN NOT BE PRODUCED EXACTLY THE SAME, THERE IS ONE PIN WHICH IS THE WIDEST AND THERE FORE HAS MORE TENSION ON IT, AND ONE WHICH IS THE THINNEST AND HAS ALMOST NO PRESSURE ON IT. WE NOW USE THE PICK TO >GENTLY< PUSH EACH PIN UP (AND TRY TO FEEL IT WHEN YOU LET IT DOWN) UNTIL WE FIND WHICH IS THE TIGHTEST ON AND WHICH IS LOOSEST. GETTING THE FEEL FOR THIS IS THE HARDEST PART OF LOCK PICKING. NOW THAT YOU HAVE FOUND THE LOOSEST ONE, GENTLY PRESS IT UPWARD UNTIL YOU FEEL A SLIGHT REDUCTION IN TENSION ON THE TENSION WRENCH. THIS WILL HAPPEN WHEN THE TOP OF THE BOTTOM PIN BECOMES EVEN WITH THE JUNCTION OF THE PLUG AND THE HOUSING. DO NOT RELEASE ANY TENSION FROM THE WRENCH NOW! THE DRIVER WILL NOW BE TRAPPED IN THE HOUSING AS ILLUSTRATED HERE: (DON'T I DRAW PRETTY) ! !*! ! HOUSING ! !*! ! ! !*! ! ___________! !_! !___________ _______________ ___________ ! !*! ! PLUG ! !*! ! ! \_/ ! ! ! NOW YOU CONTINUE THIS PROCESS WITH EACH OF THE PINS UNTIL YOU WORK YOUR WAY UP TO THE ONE THAT IS WIDEST. WITH SOME PRACTICE YOU CAN GET FAIRLY FAST AT THIS. I SUGGEST PRACTICING ON A FOUR PIN TUMBLER LOCK THAT IS BOUGHT FROM A HARDWARE STORE, THE CHEAPER THE BETTER. I WOULD LIKE TO DISCUSS A PATICULAR CONFIGURATION OF THE PINS NOW THAT MAY PRESENT A PARTICULARLY HARD JOB TO PICK. THIS IS GRAPHICLY SHOWN HERE BY THE TWO MIDDLE PINS: !*! !*! !*! !*! !*! !*! !_! !*! !*! !*! _ !*! !_! !*! !*! !_! _ !*! !*! _ !*! !*! !*! !*! !*! !_! !*! !*! !*! _ !*! !*! !*! !*! !*! !*! \_/ \_/ \_/ \_/ \_______________ WHEN YOU TRY TO PUSH THE 2ND PIN FROM THE LEFT UP, YOU WILL UNAVOIDABLY BE PUSHING THE ONE IN FRONT OF IT UP BE- CAUSE OF IT'S LONG BOTTOM PIN. THE ONLY SOLUTION FOR THIS IS TO GET A SPECIAL PICK THAT LOOKS LIKE THIS: \ \ _______________ \_/ THE MAJOR PROBLEM WITH THIS IS THAT IT IS HARD TO INITIALLY DETECT. THE REASON THAT IT MAKES IT HARDER IF IT IS NOT IMMEDIETLY APPERANT IS THAT YOU UN- AVOIDABLY PUSH THE 3RD PIN FROM THE LEFT UP INTO THE HOUSING, GETTING IT JAMMED: ! !*! ! HOUSING ! !_! ! ! _ ! ! !*! ! __________! !*! !________ ___________ !*! ________ !!*!! PLUG !!*!! !\_/! I WOULD ALSO LIKE TO ADDRESS A TECHNIQUE CALLED RAKING. IT USES A TOOL LIKE THIS: \/\/\/\___________ BASICLY YOU "RAKE" IT BACK AND FORTH ACROSS THE PINS, HOPING THAT COMBINED WITH THE TENSION IT WILL GIVE YOU THE RIGHT COMBINATION. THIS WAY HAS BEEN KNOWN: FAST SOMETIMES, BUT IS NOT VERY RELIABLE, AND I WOULD SUGGEST LEARNING TO ACTUALLY "PICK" THE LOCK. EARLIER I PROMISED AN ADDRESS TO ORDER LOCKSMITHING MATERIALS FROM, SO HERE IT IS: GARRISON PROTECTIVE ELECTRONICS BOX 128 KEW GARDENS, NEW YORK, 11415 SOURCES: PERSONAL PRACTICE AND MANY EXCELLENT BOOKS FROM MENTOR PRESS, IF YOU WOULD LIKE THEIR CATALOG, SEND A SASE TO: THE INTELLIGENCE LIBRARY MENTOR PULICATIONS 135-53 NORTHERN BLVD. FLUSHING, NY 11354 AND ASK FOR ANY INFORMATION AVAILABLE ON THE INTELLIGENCE LIBRARY. THIS CONCLUDES OUR EXTRAORDINAIRELY GRAPHIC ARTICLE ON LOCK PICKING. IF YOU HAVE ANY QUESTIONS, LEAVE E-MAIL FOR DARC DEATHE ON MOST NATIONAL BBS'S. Edited by : Quasimoto (> ]]]]]]]]]]#[[[[[[[[[[ ]] LOCK PICKING [[ ]] BY [[ ]] ^^^NIGHTWING^^^ [[ ]]]]]]]]]]#[[[[[[[[[[ SO YOU WANT TO BE A CRIMINAL. WELL, IF YOU ARE WANTING TO BE LIKE JAMES BOND AND OPEN A LOCK IN FIFTEEN SECONDS, GO TO HOLLYWOOD BECAUSE THAT'S THE ONLY PLACE YOUR GONNA DO IT. EVEN EXPERIENCED LOCKSMITHS CAN SPEND 5 TO 10 MINUTES ON A LOCK IF THEY'RE UNLUCKY. IF YOU ARE LOOKING FOR EXTREMELY QUICK ACCESS, LOOK ELSEWHERE. THE FOLLOWING INSTRUCTIONS WILL PERTAIN MOSTLY TO THE "LOCK-IN-KNOB" TYPE LOCK, SINCE IT IS THE EASIEST TO PICK. IF THERE IS SUFFICIENT DEMAND, I WILL LATER WRITE A FILE DISCUSSING THE OTHER FORMS OF ENTRANCE, INCLUDING DEAD-BOLT FIRST OF ALL, YOU NEED A PICK SET. IF YOU KNOW A LOCKSMITH, GET HIM TO MAKE YOU A SET. THIS WILL BE THE BEST POSSIBLE SET FOR YOU TO USE. IF YOU FIND A LOCKSMITH WILLING TO SUPPLY A SET, DON'T GIVE UP HOPE. IT IS POSSIBLE TO MAKE YOUR OWN, IF YOU HAVE ACCESS TO A GRINDER (YOU CAN USE A FILE, BUT IT TAKES FOREVER.) THE THING YOU NEED IS AN ALLEN WRENCH SET (VERY SMALL). THESE SHOULD BE SMALL ENOUGH TO FIT INTO THE KEYHOLE SLOT. NOW, BEND THE LONG END OF THE ALLEN WRENCH AT A SLIGHT ANGLE..(NOT 90 DEG.) IT SHOULD LOOK SOMETHING LIKE THIS: #1 \\ \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ (THIS IS THE HANDLE \\\ THAT WAS ALREADY \\\ (HERE.) \\\ \\\ \\\ NOW, TAKE YOUR PICK TO A GRINDER OR A FILE AND SMOOTH THE END (#1) UNTIL IT'S ROUNDED SO IT WON'T HANG INSIDE THE LOCK. TEST YOUR TOOL OUT ON DOORKNOBS AT YOUR HOUSE TO SEE IF IT WILL SLIDE IN AND OUT SMOOTHLY. NOW, THIS IS WHERE THE SCREWDRIVER COMES IN. IS IT SMALL ENOUGH FOR IT AND YOUR PICK TO BE USED IN THE SAME LOCK AT THE SAME TIME, ONE ABOVE THE OTHER ? LETS HOPE SO, BECAUSE THAT'S THE ONLY WAY YOUR GONNA OPEN IT. IN THE COMING INSTRUCTIONS, PLEASE REFER TO THIS CHART OF THE INTERIOR OF A LOCK: XXXXXXXXXXXXXXXXXXXXXXX| K # # # # # # | E # # # # | Y * * | H * * * * * * | O | L | E XXXXXXXXXXXXXXXXXXXXXXX| #= UPPER TUMLER PIN *= LOWER TUMLER PIN X= CYLINDER WALL (THIS IS A GREATLY SIMPLIFIED DRAWING) THE OBJECT IS TO PRESS THE PIN UP SO THAT THE SPACE BETWEEN THE UPPER PIN AND THE LOWER PIN IS LEVEL WITH THE CYLINDER WALL. NOW, IF YOU PUSH A PIN UP, ITS TENDANCY IS TO FALL BACK DOWN, RIGHT ? THAT IS WHERE THE SCREWDRIVER COMES IN. INSERT THE SCREWDRIVER INTO THE SLOT AND TURN. THIS TENSION WILL KEEP THE "SOLVED" PINS FROM FALLING BACK DOWN. NOW, WORK FROM THE BACK OF THE LOCK TO THE FRONT, AND WHEN YOU'RE THROUGH..... THERE WILL BE A CLICK, THE SCREWDRIVER WILL TURN FREELY, AND THE DOOR WILL OPEN. DON'T GET DISCOURAGE ON YOUR FIRST TRY! IT WILL PROBABLY TAKE YOU ABOUT 20-30 MINUTES YOUR FIRST TIME. AFTER THAT YOU WILL QUICKLY IMPROVE WITH PRACTICE.